كيفية تركيب المقعد الثاني Pivot Xpand NXT

By Car Seats, Strollers, & Baby Essentials | Evenflo® Official Site | Published: 2026-10-29

Category: أدلة إرشادية

اتبع هذه التعليمات خطوة بخطوة لتثبيت المقعد الثاني Evenflo Pivot Xpand NXT وحوّل عربة الأطفال المفردة إلى عربة مزدوجة.

Quick Answer

To install the Pivot Xpand NXT Second Seat, remove the existing seat or carry cot, attach the second seat adapter brackets to the stroller frame, then click the second seat into place. The entire process takes about five minutes and requires no tools.

Before You Start: Check Compatibility

The Evenflo Pivot Xpand NXT Second Seat is designed exclusively for the Pivot Xpand NXT stroller frame. It will not fit older Pivot Xpand models or other stroller brands. Confirm your stroller model number before purchasing.

If you plan to use the second seat with a car seat adapter (for a travel system), install the adapters first and then attach the second seat in the rear position. The toddler seat can also be used in lay-flat pramette mode for newborns.

Common Mistakes to Avoid

A frequent error is forcing the second seat onto the frame without fully engaging the adapter brackets. Always listen for a distinct click on both sides. Another mistake is using the second seat in the front position while a car seat is attached—the second seat should only go in the rear position when used with a car seat adapter.

Step-by-Step Installation Guide

1. Remove the Existing Seat or Carry Cot: Press the release buttons on both sides of the stroller frame and lift the seat or carry cot straight up and off. Set it aside. Check that the frame is clear of any attachments before proceeding.
2. Attach the Adapter Brackets: Align the adapter brackets (included with the second seat) with the mounting points on the stroller frame. Push until you hear a click on each side. Tug gently to confirm they are locked. If you do not hear a click, the bracket is not fully seated. Do not proceed until both sides click.
3. Mount the Second Seat: Hold the second seat at a slight angle and slide the connectors onto the adapter brackets. Push down until the seat clicks into place. Shake the seat gently to ensure it is secure. The seat should not wobble. If it feels loose, remove and reattach, making sure the adapters are correctly positioned.
4. Adjust the Recline and Harness: Use the recline trigger on the back of the seat to adjust the angle. For a newborn, set it to the lay-flat pramette position. Adjust the five-point harness to fit your child snugly. Always use the harness in the lowest position for infants and adjust as your child grows.
5. Test the Fold Mechanism: With the second seat installed, practice folding the stroller. The Pivot Xpand NXT folds with both seats attached. Press the fold button and pull the handle upward. Ensure nothing is pinched. If the stroller does not fold flat, check that both seats are in their most upright position before folding.

Product Details

Pivot Xpand NXT Stroller Second Seat: The Evenflo Pivot Xpand NXT Second Seat transforms your single Pivot Xpand NXT into a complete double stroller solution. The toddler seat transitions to lay-flat pramette mode for babies. This means you can use the same seat for a newborn (in pramette mode) and later for a toddler, making it a long-term investment for growing families.
Pivot Xpand NXT Stroller Second Seat