One seat, two distinct jobs
The Evenflo Chase Plus 2-in-1 Booster Car Seat is designed to cover two stages: a forward-facing harnessed booster and a high-back booster that uses the vehicle belt. The seat is listed to fit children from 22 to 120 lbs. Because the two modes rely on different restraint systems, the fit checks and installation steps are not interchangeable.
This comparison focuses on what changes between the modes and what stays the same, using the supplied product information. It does not cover newborn use, rear-facing installation, or lower weight limits beyond the listed range.
The Chase Plus at a glance
- Chase Plus 2-In-1 Booster Car Seat - Support: Adjusts to fit children 22–120 lbs. as a forward-facing harnessed booster or a high-back booster with vehicle belt. This is the full listed range for both modes; the seat does not have a rear-facing or newborn configuration.

Chase Plus 2-In-1 Booster Car Seat - Support - Chase Plus 2-In-1 Booster Car Seat - Support: RightFit exclusive belt path technology auto-adjusts the vehicle belt when you adjust the headrest to the correct height. In belt-positioning mode, the headrest height and belt routing are linked, so getting the headrest right is part of getting the belt fit right.
- Chase Plus 2-In-1 Booster Car Seat - Support: Lightweight and equipped with LATCH and tether system for easy installation and transfer between multiple vehicles. This matters for installation in harness mode and for moving the seat between caregivers or cars.
Harness mode vs. belt-positioning mode
The table below summarizes the practical differences based on the supplied information. It does not replace the seat's printed instructions or your vehicle owner's manual.
- Restraint system: Harness mode uses the seat's forward-facing harness. Belt-positioning mode uses the vehicle's lap and shoulder belt to restrain the child.
- Weight range: The seat is listed for 22–120 lbs. overall. The supplied information does not break the range into separate harness and booster limits, so check the seat labels and manual for the exact changeover point.
- Installation anchor: The Chase Plus includes LATCH and a tether system for installation. In belt-positioning mode, the vehicle belt is the child's restraint, so follow the seat's instructions for whether and how to secure the booster itself.
- Belt routing: Harness mode routes the seat's own harness over the child. Belt-positioning mode routes the vehicle shoulder belt through the booster's belt guide, and the RightFit belt path adjusts with the headrest.
- Headrest adjustment: In both modes the headrest should be set to the correct height for the child. In belt-positioning mode, that adjustment also positions the vehicle belt via RightFit.
- Daily use: Harness mode means buckling the child into the seat's harness each trip. Belt-positioning mode means the child uses the vehicle belt, which can be quicker for older children but depends on a consistent belt fit.
Fit checks that change with the mode
Use these checks each time you adjust the seat or change caregivers. They are general fit reminders, not a substitute for the manufacturer's instructions.
- Harness mode: snug harness: The harness should fit snugly against the child's body with no slack that can be pinched at the shoulder or hips. The supplied information does not include a pinch-test specification, so follow the seat's manual for the exact check.
- Harness mode: headrest height: Set the headrest so the harness straps are at or below the child's shoulders as directed by the seat's instructions. The supplied information does not state a specific shoulder-height rule.
- Belt-positioning mode: belt guide: The vehicle shoulder belt should sit through the booster's belt guide. Adjust the headrest to the correct height, and RightFit will auto-adjust the vehicle belt path to help achieve a proper fit.
- Belt-positioning mode: lap belt placement: The lap belt should cross low over the child's hips, not the stomach. The supplied information does not give a measurement, so check the seat's manual and your vehicle manual.
- Both modes: no gaps behind the child: The child should sit back against the seat with the headrest supporting the head. Recheck after adjusting the headrest or switching modes.
When the switch makes sense—and what to confirm first
The Chase Plus is designed to move from harness to belt-positioning booster as the child grows, but the supplied information does not state a specific age or weight at which that change should happen. Before switching, confirm the child meets the seat's minimum and maximum requirements for belt-positioning mode as printed on the seat labels and in the manual. Also check that the vehicle belt fits the child correctly through the belt guide; if it does not, the harness mode may still be the better fit.
A 2-in-1 booster seat transition is not only about weight. The child also needs to sit still for the whole trip and keep the vehicle belt positioned correctly. If you are unsure, the harness mode gives you a built-in restraint system, while belt-positioning mode relies on the vehicle belt and the child's posture.
Practical tradeoffs between the two modes
- Harness mode: more buckling, more built-in control: The seat's harness restrains the child directly, which can be helpful for younger children who need help staying in position. The tradeoff is more steps at every trip.
- Belt-positioning mode: faster entry and exit, more dependence on belt fit: Using the vehicle belt can be quicker for older children, but the belt must route correctly through the guide and stay in place. RightFit helps by adjusting the belt path with the headrest, but it does not replace a fit check.
- Moving between vehicles: The Chase Plus is lightweight and includes LATCH and tether for installation, which can make transfers easier. In belt-positioning mode, remember that the vehicle belt is the child's restraint, so recheck routing after any move.
- Cleaning and care: The padded seat is removable and machine-washable. The supplied information does not specify washing temperature or drying instructions, so follow the care label on the seat.
What the supplied information does not settle
The supplied product information does not include separate weight limits for harness mode and belt-positioning mode, a minimum age for either mode, or a specific installation procedure beyond the presence of LATCH and tether. It also does not state whether the booster should be secured with LATCH when used in belt-positioning mode. For those details, rely on the seat's printed manual and labels, and contact Evenflo ParentLink customer service if anything is unclear.
This comparison is based only on the supplied catalog information for the Chase Plus. It is not a safety rating or a recommendation for a specific child. Always follow the seat's instructions and your vehicle's owner's manual for installation and use.

