How to Use the Pivot Xpand Travel System with Rider Board

Quick answer

Attach the Stroller Rider Board to the rear of your Pivot Xpand frame, then have your child stand on it while you push. Follow these steps for a secure fit and safe ride.

Step-by-step Rider Board setup

1. Unfold the stroller frame: Open the Pivot Xpand frame fully until it locks into place. Make sure both rear wheels click and the frame is stable before continuing. Common mistake: unfolding on an uneven surface can cause the frame to tip. Always do this on flat ground.
2. Locate the rear crossbar attachment points: Find the two small slots on the rear crossbar near the back wheels. These are the only places the Rider Board mounts. Do not try to attach it to the front or sides.
3. Align the Rider Board tabs with the slots: Hold the Rider Board so the two plastic tabs on its base face the slots. Slide the board forward until the tabs click into place. You should hear two distinct clicks. If you don't hear clicks, the board is not locked. Push firmly until it seats fully.
4. Secure the safety strap: Wrap the included safety strap around the stroller handlebar and clip it to the Rider Board. This prevents the board from detaching if the tabs release accidentally. Common mistake: skipping the strap. Always use it to keep the board attached even if bumped.
5. Test the attachment before each use: Lift the stroller slightly by the handle and shake it gently. The Rider Board should not wobble or slide. If it moves, recheck the tabs and strap. Check the connection every time you unfold the stroller, as the board can loosen over time.

Product facts

• Pivot Xpand Modular Travel System and Stroller Rider Board Bundle: The Pivot Xpand Modular Travel System and Stroller Rider Board Bundle includes the stroller frame, one infant car seat, two toddler seats, and the Rider Board. You get everything needed for a growing family in one box, so you don't have to buy the board separately.