Pivot Xpand NXT Travel System Setup: 6 Steps for New Parents

Quick answer

Set up the Pivot Xpand NXT by unboxing and checking parts, unfolding the stroller frame, attaching the wheels and toddler seat, then installing the LiteMax NXT infant car seat using the slide-and-lock system. Always test each connection with a firm pull before use.

Setup steps for the Pivot Xpand NXT Travel System

1. Unbox and check all parts: Remove all components from the box and compare them against the included parts list. Lay everything out on a clean, flat surface. Common mistake: discarding small hardware or the manual with the packaging. Keep the manual and any hardware bags together in a labeled container for future reference.
2. Unfold the stroller frame: Release the folding latch and lift the handle until the frame clicks into the open position. Push down on the frame to ensure it is fully locked. Common mistake: forcing the frame open without releasing the latch, which can damage the locking mechanism. Test the frame by pressing down firmly on the handle; it should not fold.
3. Attach the wheels: Insert each wheel axle into its corresponding leg until it clicks. Give each wheel a firm pull to confirm it is secure. Common mistake: mixing up front and rear wheels, which can affect steering. Spin each wheel after attachment to check for smooth rotation.
4. Attach the toddler seat: Align the toddler seat connectors with the slide-and-lock mounts on the stroller frame and slide until it locks into the highest position. You should hear a click. Common mistake: not pushing the seat down until it fully locks, leaving it loose. Lift the seat gently to confirm it is locked before placing a child in it.
5. Install the LiteMax NXT infant car seat: If using the infant car seat on the stroller, align its connectors with the slide-and-lock mounts and push down until it clicks. The car seat should sit at the highest position. Common mistake: assuming the car seat is locked without hearing or feeling the click. Pull up on the car seat handle to verify it is securely attached to the stroller.
6. Final safety check: With the stroller fully assembled, engage the brakes, check that all connections are tight, and ensure the seat is properly reclined for your child’s age. Review the manual for any specific adjustment instructions. Common mistake: skipping the brake test or ignoring recline limits. Perform this check every time you switch between configurations or adjust the seat.

Product facts

• Pivot Xpand NXT Travel System featuring LiteMax NXT Infant Car Seat: The Pivot Xpand NXT Travel System transforms from a single to a double stroller with no tools, extra parts, or adapters required. You can set it up as a single now and add a second seat later without buying additional adapters.

  

• Pivot Xpand NXT Travel System featuring LiteMax NXT Infant Car Seat: The easy slide-and-lock system places the toddler seat or infant car seat into the highest position on the stroller. This makes attaching and removing seats quicker and keeps the infant car seat at a convenient height for parents.