The Shyft DualRide doesn't fold like a typical stroller
If you're searching for Shyft DualRide fold instructions, the first thing to understand is that this combo doesn't have a traditional fold joint. It's a single piece of gear that converts from infant car seat to stroller by lifting the carrier off its base, releasing the wheels, and rolling on. For trunk storage, the relevant move is retracting the wheels—not collapsing a frame.
That distinction matters when you're planning trunk space. The supplied product information describes wheel retraction for carrying up or down stairs, but it does not provide a collapsed length, width, or height. So you can't calculate trunk fit from a spec sheet alone. You'll need to test it in your vehicle or measure the unit yourself with the wheels retracted.
How the wheel-retraction sequence works
The supplied materials describe the car-to-sidewalk transition and the stairs maneuver, but they do not list a separate trunk-loading procedure. The steps below follow the same retraction logic the product describes for stairs. Treat them as a practical starting point, not a manufacturer instruction for trunk storage.
- Lift the carrier off the base: The combo starts as an infant car seat on its base. Lift the carrier off the base first—this is the same first move the product describes for going from car to sidewalk.
- Release the wheels: The product describes releasing the wheels to roll on the sidewalk. For storage, you're doing the reverse: retracting them so the unit is more compact and easier to lift.
- Retract the wheels: The stairs maneuver in the supplied information is: retract the wheels, carry up or down steps, then pop the wheels back down. Use that same retraction to reduce the footprint before loading into a trunk.
- Lift and load: With the wheels retracted, lift the unit into the trunk. The product places the infant carrier higher on the stroller so your baby is near, which affects the center of gravity—lift with two hands and keep the carrier attached or removed per your own setup.
- Pop the wheels back down: When you arrive, set the unit down, pop the wheels back down, and roll on. This is the same sequence the product describes for finishing a stairs carry.
What to check before you count on trunk fit
Because the supplied information doesn't include collapsed dimensions, the honest answer is that trunk fit is a measure-it-yourself question. Before you buy, do three things: measure your trunk opening and interior depth, test-lift the unit if you can see it in a store, and confirm whether you plan to keep the car seat base installed in the vehicle or remove it for storage.
One design detail helps here: the combo is a single piece that Shyfts from car seat to stroller in one step, so you're not managing two separate items in the trunk. That said, the carrier sits higher on the stroller by design, which makes the unit taller than some low-profile strollers. If your trunk is shallow, that height is the dimension to check first.
Shyft DualRide specs that affect storage and handling
- Shyft DualRide Infant Car Seat and Stroller Combo: Designed for infants 3 lb to 30 lb (15.7 in. to 32 in.), with a no-rethread harness that adjusts to 8 positions. The usable range tells you how long you'll be lifting this unit in and out of a trunk—from newborn through the toddler months covered by the stated limits.

Shyft DualRide Infant Car Seat and Stroller Combo - Shyft DualRide Infant Car Seat and Stroller Combo: Lift the carrier off the base, release the wheels, and roll on; for stairs, retract the wheels, carry, then pop them back down. This is the only supplied description of wheel retraction. It's the basis for treating retraction as the storage move, even though the product doesn't label it as a fold.
- Shyft DualRide Infant Car Seat and Stroller Combo: Compatible with the Evenflo Gold Shyft Travel System; full-coverage canopy with UPF 50+. If you're storing the combo in a trunk, the canopy is part of the package. Confirm it folds or retracts enough that it doesn't catch on your trunk lid.
Folding tips that apply to any car seat stroller combo
These are general habits, not Shyft-specific instructions. They help whether you're loading the Shyft DualRide or another combo.
- Empty the storage basket first: Diaper bags, toys, and groceries add weight and bulk. Clear them out before lifting so you're not wrestling a loaded unit into the trunk.
- Practice the sequence at home: Run through the lift-release-retract sequence in your driveway before you're in a crowded parking lot. Muscle memory matters more than speed.
- Check the trunk lid clearance: Measure from the trunk floor to the closed lid, not just the opening. A unit that fits through the opening can still be too tall to close the lid.
- Keep the base installed if you can: The Shyft DualRide uses a base in the vehicle. If your daily routine allows, leave the base installed and load only the carrier-plus-stroller unit into the trunk.
Installation support if you're unsure
Trunk fit is one question; vehicle installation is another. The Shyft DualRide uses the LockStrong belt-tensioning system and Quick Connectors for installation, and Evenflo offers live video support with a certified car seat safety technician through its ParentLink Consumer Care Team. If you're unsure whether the base and carrier are properly secured before you start loading and unloading, use that support rather than guessing.
The supplied information doesn't include a trunk-storage procedure or collapsed dimensions, so treat any fit claim—including this article's—as a starting point for your own measurement. The product meets or exceeds all applicable federal safety standards and is structural integrity, rollover, and temperature tested, but those tests address safety, not trunk size.

